Tomelleri Arm

Locked
User avatar
CrashN8
Site Admin
Site Admin
Posts:629
Joined:Thu Feb 09, 2017 4:07 pm
Tomelleri Arm

Post by CrashN8 » Tue Jun 02, 2020 9:44 am

Tomelleri Arm
Important Note - So far we have tested version no later than 3.7 SP1. We have not tested 64 bit version(s) of CMM-Manager that became available starting with version 3.8.

Must use CMM-Manager MCA I driver and TomelleriCore software

Update TCore parameter file - From Windows System Tray right click on TCore to access settings. From the Settings tab, under Parameter file #1 browse to the paramet.cms file on the USB thumb drive included with Arm.

Turn on MCA-Utilities Server - In TomelleriCore settings please check "Use MCA-Utilities Server" option as shown below:

Tomelleri_Core_settings.jpg
Tomelleri_Core_settings.jpg (93.18KiB)Viewed 132 times
Restore .REG - At the bottom of the Diagnostics tab click button [Restore .REG] then browse to the .reg file on the USB drive mentioned above.

Shut the entire system down and restart.

CMM-Manager Machine Setup - The Arm Utility Path needs to be the file path to Tomelleri's TCore software and not MCA Utilities.

For iOS / Mobile device click here to download the PDF file.

It appears you don't have a PDF plugin for this browser... you can click here to download the PDF file.


Locked