Contour G2

Post Reply
User avatar
myork1967
Nikon
Nikon
Posts: 62
Joined: Wed Mar 14, 2012 10:29 pm
Location: Christopher, Illinois
Contact:

Contour G2

Post by myork1967 » Wed Jul 25, 2018 6:46 am

Just wondering if cmm manager will work on a Zeiss g2 with a scanning head.

medupriest
SUDO
SUDO
Posts: 423
Joined: Fri Mar 13, 2015 11:59 am

Re: Contour G2

Post by medupriest » Wed Jul 25, 2018 12:24 pm

The Zeiss scanning heads are not supported. sorry.

User avatar
Ryan Christopher
Nikon
Nikon
Posts: 253
Joined: Mon Jun 06, 2011 3:00 pm
Location: Sumner Washington
Contact:

Re: Contour G2

Post by Ryan Christopher » Fri Jul 27, 2018 11:01 am

If you don't need scanning, there is an RDS adaptor that will hold a tp20 and allow CMM Manager to work just fine. We converted a scanning Calypso zeiss with a C99 controller to a touch trigger CMM Manager machine a few years back.

On Zeiss website:
RDS-Adapter plate/Renishaw probeTP20/TP6
Item No.: 600605-8261-000
Ryan Tackes
Applications Manager, VMS Inc.
http://www.vantagemeasure.com/

Post Reply