Search found 16 matches: elevation angle

Searched query: +elevation +angle

by JNorton
Mon Aug 12, 2019 1:52 pm
Forum: Tip Calibration / Probe config
Topic: UCC Server Qualification
Replies: 4
Views: 2193

Re: UCC Server Qualification

@CrashN8 Thanks for the info, I'm contacting Renishaw right now.

@Ryan I adjusted the elevation angle to 10° and now the Std Dev is reading at .000157. Much better. Thanks for the info!
by Ryan Christopher
Mon Aug 12, 2019 10:51 am
Forum: Tip Calibration / Probe config
Topic: UCC Server Qualification
Replies: 4
Views: 2193

Re: UCC Server Qualification

Yikes! - you may also want to change the elevation angle on this tool.

search.php?keywords=elevation+angle
by CrashN8
Tue Nov 27, 2018 3:10 pm
Forum: Tip Calibration / Probe config
Topic: 0.5mmX10mm Calibration Shanking Out
Replies: 2
Views: 2524

Re: 0.5mmX10mm Calibration Shanking Out

... https://www.cmmmanager.com/forum/viewtopic.php?f=50&t=1557&p=5591&hilit=elevation+angle#p5591 Actually no... This customer is not using UCC / I++ interface. I think the solution ...
by jpo_031
Thu Sep 21, 2017 2:03 pm
Forum: Tip Calibration / Probe config
Topic: Cylinder styli calibration error
Replies: 2
Views: 4293

Re: Cylinder styli calibration error

I did the changes on the elevation angle as recommended and seems to be working, measured ring gauges are giving the correct readings now, also with ISO 10360 probing test all the results are much better.

Thanks for the help.
by medupriest
Thu Sep 21, 2017 9:23 am
Forum: Tip Calibration / Probe config
Topic: Cylinder styli calibration error
Replies: 2
Views: 4293

Re: Cylinder styli calibration error

... had suggested: "In UCC Server in the advanced tab, try changing the "Elevation Angle" for this tip to something like 10 degrees. [advanced tab > machine name > equipment ...
by ameade022008
Wed Aug 23, 2017 3:17 pm
Forum: Tip Calibration / Probe config
Topic: Star Probe Calibration
Replies: 6
Views: 9366

Re: Star Probe Calibration

... is there an alternate way to calibrate this? You need to adjust the Elevation angle(REACH) on all the 4 star probes. that way its not trying to calibrate any of them over ...
by eiland89
Wed Dec 21, 2016 10:53 am
Forum: Tip Calibration / Probe config
Topic: Error - PH20 with 0.7mm tip & 1mm tip
Replies: 7
Views: 9527

Re: Error - PH20 with 0.7mm tip & 1mm tip

I had the same issue with a .5mm tip and a 1mm tip. The 20.0 elevation angle helped to get my tip conformity to .0093. I am having trouble with my 2x20 with 10mm extension ...
by Ryan Christopher
Wed Oct 19, 2016 5:03 pm
Forum: PH20 / I++
Topic: 1x10 tip calibration
Replies: 2
Views: 4514

Re: 1x10 tip calibration

Howdy...Search for 'elevation angle' and that will give you the setting to change in ucc server.
by jswope
Fri Jun 24, 2016 6:58 am
Forum: PH20 / I++
Topic: Calibrating a cylindrical tip with PH20 head
Replies: 3
Views: 8151

Re: Calibrating a cylindrical tip with PH20 head

In UCC Server you may want to look at your elevation angle. This may help.
Capture.JPG